New example machines for SinuTrain for SINUMERIK Operate V4.4 Ed.2/Ed.3
Download new machine configurations for SinuTrain for SINUMERIK Operate V4.4 Ed.2 and Ed.3 for the users, who like to program in the ISO dialect.
You can expand SinuTrain for SINUMERIK Operate V4.4 Ed.2/Ed.3 with the new example machines "Lathe with driven tool (ISO dialects)" and "Simple vertical milling machine (ISO dialects)". These example machines include example programs that have been created using the ISO dialect T / ISO dialect M functions.
Lathe with driven tool (ISO dialect)
The following cycles can, for example, be used with the turning machine:
G70 Finishing cycle
G71 Stock removal cycle, longitudinal axis
G72 Stock removal cycle transverse axis
G73 Contour repetition
G74 Deep-hole boring and grooving in the longitudinal axis (Z)
G75 Deep-hole boring and grooving in the transverse axis (X)
G76 Multiple thread cutting cycle
To download the following file, simply register or log in to your existing account.
Simple vertical milling machine (ISO dialect)
The following cycles can, for example, be used with the milling machine:
G73 Deephole drilling with chip breakage
G76 Fine boring cycle
G81 Drilling cycle, spot drilling
G82 Drilling cycle, counterboring
G83 Deephole drilling with chip removal
G85 Drilling cycle
G86 Boring cycle
G87 Back boring cycle
G89 Boring cycle, retract using G01
To download the following file, simply register or log in to your existing account.
Instructions for integrating new machine configurations in SinuTrain for SINUMERIK Operate V4.4 Ed.2/Ed.3
Requirement: SinuTrain for SINUMERIK Operate V4.4 Ed.2/Ed.3 has been installed.
Download the new example machine (*.zip).
Unpack downloaded zip-file.
Start SinuTrain for SINUMERIK Operate.
Click on the "Import" button.
Select downloaded machine configuration file (*.set).
Adjust settings of the new machine configuration, if necessary.
After clicking on the "Finish" button, the machine configuration is applied.