Proven in over 30 years in drive technology, ARPEX all-steel lamella couplings are used in any situation that requires reliable, maintenance-free torque transfer where shaft displacement is occurring simultaneously.ARPEX couplings are made completely out of steel. Torque is transferred with torsionally rigid, flexible lamellas combined into a lamella package using a bushing and ring. This ensures easy, operationally reliable assembly. The design version with two lamella packages enables compensation not only of angular and axial shaft offsets, but radial shaft offsets as well.
ARPEX all-steel couplings are free of backlash, have a compact design and are characterized by a low power-to weight ratio. They are suitable for use at high ambient temperatures and particularly for machines that must be driven precisely, e.g. paper and printing machines, pumps, compressors and high-speed generators. With numerous standard components, ARPEX couplings can be combined into a wide variety of designs that can be used in many applications. The product range includes eight different series with performance ranges from 92 Nm to 1,450,000 Nm.
Angular, radial and axial shaft displacement possible
Not dependent on rotation direction
Maintenance-free and wear-resistant
Torsion-resistant and free of backlash
Temperature resistant from - 40 C to + 280 C
Low reaction forces
Low vibration (even at maximum allowable speed)
Series can be used in areas with explosion hazards, certified in accordance with 94/9/EG (ATEX 95)
Easy assembly due to compact design
Covers a wide performance spectrum with many different series and sizes
Design versions for specific applications possible
Share this Page:
Share this Page on...
Close to you: your point of contact.
Simple configuration: online in X.CAT NG.
The Mall: online ordering made easy.
The overview: catalogues and brochures.
In an emergency: your 24/7 customer service. Tel.: +49 (0)173/2955825